<![CDATA[LSI Staffing - Kansas City: jobboard]]> http://KANSASCITYJOBS.LSISTAFFING.COM/ en-us <![CDATA[Clerk]]> Monday-Friday and every other Saturday

$11-12/hr BOE

Must Have Good Credit
]]>
Wed, 23 May 2018 00:00:00 EDT 0
<![CDATA[Warehouse]]> Monday-Friday 7: 30 AM to 4 PM

$11.00/hr. To start, + $40 cash to cover for gas expenses( every two weeks)

Duties and Responsibilities:**Feed, pull, push and stack finished wood from machines, quality control, run machines, use nail guns, hammers, tape measures and saws . Must be able to read a tape Measure.

Requirements and Qualifications:**

Temp to Hire / Fulltime/ 1st shift

Lifting50lb Must have Reliable transportation.

Apply today at www.Lsistaffing.Com

Call or Text 402 554.1833 for more details!

 
]]>
Tue, 22 May 2018 00:00:00 EDT 0
<![CDATA[Assembler]]> Sign Assembly
CLASSIFICATION: Non-Exempt
LOCATION: Omaha
Hours: 730am-430pm
Pay: $12/13/hr
.
PURPOSE:
Assemblers are responsible for finishing projects as they move from our fabrication operations to the installers.
Assemblers are tasked with finishing all sign products. Assemblers use a variety of hand and power tools. Familiarity with common materials used in the production of electric signs is essential. Assemblers utilize forklifts to load & secure our product onto cargo trailers for transport by the Installers. Attention to detail is critical. Assemblers are also responsible for packing support materials & tooling to support each install.


PRINCIPAL DUTIES & RESPONSIBILITIES:
Wires the Electrical Lighting for Sign Cabinets
Checks Patterns to Make Sure all Power/Mounting Holes & Letter Sizes Match Specification
Performs General Assembly of Signs
Cleans & Labels Signage According to Procedure
Packages & Loads Finished Product for Transfer
Is Responsible for Quality Control of Each Item to be Shipped or Installed
Ensures All Install Equipment & Materials are Packed Accordingly
Confirms All Jobs Have Install Instructions & Receiving Procedures
Performs Other Work Assigned by the Supervisor
Verifies that UL-48 Specifications are Adhered to on All Electrical Products
Records Inventoried Material Used to the Corresponding Job
Maintains Assigned Work Area at All Times
Adheres to Safety Practices at All Times

JOB SPECIFICATIONS:
A High School Diploma or Equivalent
Forklift Experience (is a plus- but not required)
Familiarity with Sheet Metal Shears, Metal Brakes, & Power Hand Tools
Pays Attention to Details Strong verbal and written communication skills
Is a Self-starter
Enjoys Working in a Team Environment
Is Adaptable to Evolving Client Needs

]]>
Tue, 22 May 2018 00:00:00 EDT 0
<![CDATA[Concrete Worker]]>
. Concrete Laborer ESSENTIAL DUTIES AND RESPONSIBILITIES of Concrete Carpenter: Include but are not limited to the following. Other duties may be assigned. Lays out pattern on wood stock, dividing pattern into sections according to shape of casting to facilitate removal of precast from mold. Cuts and shapes parts. Fits and fastens parts together to form pattern or section. Trims, sands, and shapes surfaces. Assembles sections and verifies dimensions of complete pattern. Seals mold using epoxies, lacquers or polyurethane coating applied by spray, brush or roller. Sets up molds according to shop drawings.

OTHER SKILLS AND ABILITIES: Must understand basic blueprint reading and ability to read a tape measure

PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, use hand to finger, handle or feel objects, tools or controls; reach with hands and arm; climb or balance; and stoop, kneel crouch or crawl. The noise level in the work environment is usually loud.The employee must regularly lift and or move up to 25 pounds, frequently lift and or move up to 50 pounds, and occasionally lift and or move more than 100 pounds.

WORK ENVIRONMENT: Employee is required to wear steel toed boots and safety glasses as needed.$14.50-$21.00 hr. DOE this will depend based on ability and experience.

Apply today at WWW.LSISTAFFING.COM
]]>
Tue, 22 May 2018 00:00:00 EDT 0
<![CDATA[Call Center Representative]]> Collection Specialist


Use your negotiating skills to resolve/collect bad debt accounts that have been charged off to a collection agency.

Will be making outbound calls to individuals that have outstanding debt.

Bilingual Spanish/English is a plus!

Fulltime/ 1st shift/ Monday- Friday. 8: 30am-5pm then please call us.

Apply today at WWW.LSISTAFFING.COM

CALL TODAY FOR MORE DETAILS 402.554.1833
]]>
Tue, 22 May 2018 00:00:00 EDT 0
<![CDATA[Machine Operator]]> Machinist - Omaha - 1st and 2nd Shift

Pay: $19/hr-24/hr
SUMMARY
Sets up and operates conventional, special purpose, and numerical control (NC) machines and machining centers to fabricate metallic and nonmetallic parts by performing the following duties.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
*Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerance of finished work piece, sequence of operations, and setup requirements.

* Measures, marks, and scribes dimensions and reference points on material or work piece as guides for subsequent machining.

* Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and drill presses.

* Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.

*Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.

* Verifies conformance of finished work piece to specifications.

* Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data.

* Sits and assembles parts into complete assembly.

* Verifies dimensions and alignment of assembly.

* Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems.

* Experience with building fixtures for drilling, milling, and turning.

* Responsible for checking the accuracy of engineering, sales and manufacturing offices' input to ensure customer final product is correct and within quality acceptance guidelines. Any changes or corrections must be communicated to appropriate departments so future product output is consistent with customer expectations.

* Understands, supports, implements and sustains 5S program initiatives and goals.

* Supports and upholds the quality and EHS policy,
This job has no supervisory responsibilities.


EDUCATION and/or EXPERIENCE
Associate's degree (A. A.) or equivalent from two-year college or technical school and two years related experience and/or training; or minimum of four years of job shop related experience or equivalent combination of education and experience. Or certification of completion of a Certified Apprenticeship Program


MATHEMATICAL SKILLS
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.


PHYSICAL DEMANDS
While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee frequently is required to sit, reach with hands and arms, and talk or hear. The employee is occasionally required to walk; climb or balance; and stoop, kneel and crouch. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT
While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, and extreme heat. The noise level in the work environment is usually loud.
MINIMUM TOOL REQUIREMENT
6" machinist scale
6" caliper, dial or digital
0-3" micrometer set
12" machinist combination square set, of good quality
Telescoping gauges 1/2" - 6"
Transfer punch set
Prick and center punch set
Carbide scribe
12' tape measure
Calculator - scientific
Dead blow hammer
Brass hammer
12' crescent wrench
End wrenches 7/16"-1"
Dial indicator, minimum 1" travel w/mag. Base
Edge finder
Screwdriver set
Ball pen hammer
Machinist handbook
Allen wrenches American 1/16"-1/2" metric 1.5 - 12
Thread pitch gauge
Indicator and holder Indicol
De burr tool
Roll-around tool box
Supplied by company: Safety glasses, drills, taps.


A machinist needs to be able to accomplish the following to the satisfaction of management or possess a Degree in Machine Technology


1. Single point threading I.D. O.D. And taper pipe threads. Need to be able to look up in the Machinists handbook and calculate setup and run threading operations.
2. Calculate speeds, feeds and chip loads for turning, boring and milling.
3. Be able to understand the geometry of tooling and surface finishes.
4. Sharpen drills, carbide and high speed steels for machining operations.
5. Take most any job in the shop and be able to machine to print.
6. When you have a job, be able to write the procedure in which you will create the part, how you will hold work and what steps you will take to complete the part.
7. Know the terminology of the equipment in the shop.
8. Learn how to compensate for tool deflection and consistency.
9. Layout and measure bolt circles, coordinates, slots, etc.
10. Select tooling required for the job needed, and know what kind of tooling you are using.
11. Have the specialty measuring tools and know how to use them in order to make the parts required.
12. Know about tolerance fits and be able to apply them.
13. Need to possess Machinist's handbook and be able to look up information needed to make machined parts.





]]>
Mon, 21 May 2018 00:00:00 EDT 0
<![CDATA[QUALITY ASSURANCE TECH.]]> Quality Assurance Tech

Local Machine Shop 

7: 00 am to 3: 30 pm, Monday through Friday.

Pay:$12-$16 to start depending on experience.

Temo to hire.

Willing ot train the right person.
]]>
Mon, 21 May 2018 00:00:00 EDT 0
<![CDATA[Drywall Technican]]> Drywall Sheet Rock Installers and Finishers
$16/hr
Requirements: 3-4 years experience. Must have valid driver s license and own form of transportation.
Must pass criminal background check
Lifting requirements: 60 lbs
Hours: 7-330 M-F


]]>
Thu, 17 May 2018 00:00:00 EDT 0
<![CDATA[Grinder]]> Located in McPherson, KS

2nd and 3rd Shift But must train on days

As a Grinder you will set-up and operate a variety of grinding machinery to produce a large assortment of parts or finishes often of a complex nature. Produce parts to the highest level finishes and tolerances.

Major Responsibilities of a Grinder:

  • Set-up and operate a variety of grinding machinery to blueprints specifications



  • Produce parts to the highest level finishes and tolerances



  • Make computations foe setting light gages, Hokes gages, sine bar, electro-limit gage, light gage and other instruments for precision measuring



  • Plan methods and sequence of grinding operations



  • Read part drawing with sectional views



  • Mount grinding wheel and regulating wheel on spindles with wrenches



  • Dress wheels to specifications, using dressing device



  • Move controls to set specified grinding speeds, feed rates, and spacing between wheel faces



  • Lifts and position work piece manually or with a hoist, and secures it between wheels and on work rest



*3-5 Years of related experience or training
or an equivalent combination of education and experience
]]>
Mon, 14 May 2018 00:00:00 EDT 0
<![CDATA[Assembler]]> Position Overview
  Packing and assembling of various products according to the instructions and specifications provided by the company.

Requirements Attention to details and can easily follow detailed instructions
Must be able to lift 50 lbs.
Basic math skills
Previous assembly/ packing/ warehouse experience required
Good communication skills
Must be able to endure repeativie motions
Shift Requirements

  Second and Third Shift Available with the following schedules:

  2nd Shift: 3: 00 PM to 11: 00 pm Monday through Friday (overtime may apply)
  3rd Shift:  11: 00 PM to 7: 30 PM Monday through Friday (overtime may apply)
]]>
Tue, 08 May 2018 00:00:00 EDT 0
<![CDATA[Production]]> Temp to hire, union position located in KCMO.  Must have stellar resume and willingness to work tons of overtime.
]]>
Fri, 04 May 2018 00:00:00 EDT 0
<![CDATA[Carpenters Helper]]> Assembly - Lumber

Assembling roof truces and walls.
1st shift: 6: 30am - 3: 30pm $11.00;    2nd shift $11.50/hr
  • Monday - Friday
  • Work in Waverly, NE
  • Temp to Hire
  • Drug screen required
  • Must be able to read a tape measure
  • Tools required (list below)

  22oz hammer 25 tape measure required, hammer loop and tape measure holder strongly recommended.

 

Call/text 402-261-6904 or apply at: www.LSIstaffing.Com





]]>
Wed, 02 May 2018 00:00:00 EDT 0
<![CDATA[Paint Line Helper]]> COLOR MATCHER  - 1st SHIFT

Local paint company in need of a Color Matcher.  Selected candidate will be a dependable, have dependable transportation, energetic and eager  to learn this specialized trade.  

Our client is willing to train the right individual.

Apply at www.Lsistaffing.Com or come into LSI Staffing 250 N. Kansas from 8: 00 am 11: 00 am or 1: 00 pm 3: 00 pm Monday thru Friday.

About LSI Staffing:

Since 1986, LSI Staffing has been consistently matching hard-working people with top jobs throughout Wichita, Kansas City, Lincoln/Omaha and Dallas/Irving. We understand that if you're matched to the right job, you'll do your best work. That's why we've grown to become a dominant light industrial staffing service in our markets.

LSI Staffing is proud to offer our employees a comprehensive benefits package. You will become eligible to receive these benefits once you have successfully completed the requirements described during the interview process.

Benefits include:

One week of vacation per year

Paid holidays

Direct deposit

401K with company match

Skills testing and training opportunities

Available health insurance

Visit our website for more job opportunities at
www.Lsistaffing.Com .



 

 

 
]]>
Mon, 30 Apr 2018 00:00:00 EDT 0
<![CDATA[CNC Programmer]]> CNC Mill

Temp to hire position with long time Lincoln Manufacturer.

Requirements:
  • Previous experience or college certification
  • Pre-employment salivia scrren
  • Background Check
  • E-verify

Please apply for this position at: www.Lsistaffing.Com or in person from 9AM till Noon at LSI Staffing, 3814 Normal Blvd, Lincoln, NE 68506



LSI Staffing benefits include: health & dental insurance; paid holidays; paid vacation & 401K.

 
]]>
Tue, 24 Apr 2018 00:00:00 EDT 0
<![CDATA[Labor]]> FOUNDRY WORK

Seeking hard working dependable workers for temp to hire opportunity.

Must be able to work with your hands and be mechanically inclined.

1st and 2nd shift positions available - NE Lincoln Area

Steady work and OT available - call us for details!  402-261-6904 or apply now!

 

NEW OPENINGS _ Part time work at the Foundry NOW available also!

6AM - 1PM      Monday thru Thursday
]]>
Tue, 24 Apr 2018 00:00:00 EDT 0
<![CDATA[Banquet Waitstaff]]> GREAT JOBS in the Downtown Lincoln Area!

Current needs for banquets servers,  event staff, set up crew, housekeeper and clean up.

Seeking friendly customer service orientated individuals.
  • Must be dependable
  • Background check & drug screern required
  • Flexible weekly schedules
  • Great downtown locations

 

                         Call LSI Staffing now for more information 402-261-6904







]]>
Tue, 24 Apr 2018 00:00:00 EDT 0
<![CDATA[Injection Molding]]> MOLD TECH Needed!


This position if responsible for the mold set-ups, the process control of the machines, quality of the product running in a tech s area, as well as monitor and maintain injection molding machines, maintain supplies to the floor, record production accurately on work schedules, read check lists, and act as a back-up to the Machine Operator.

The requirements for this position: person should be mechanically inclined, have good basic math skills, able to regularly lift or move 50 pounds and stand for long periods of time. Knowledge of injection mold processes and molding equipment are a plus.

 

Temp to hire opening. East Lincoln area.

Call for more details LSI Staffing 402-261-6904

Or apply now!   www.Lsistaffing.Com




]]>
Tue, 24 Apr 2018 00:00:00 EDT 0
<![CDATA[Production]]> PRODUCTION WORKERS NEEDED

Seeking dependable workers for tem to hre positions at a sporting goods manufacturer. Looking for a solid work history and dependability! 
  • Great location near downtown
  • Packaging, Machione operators, Powder Coating, CNC, and general production
  • Drug Screen Needed
  • Prefers tobacco free
  • Temp to hire opportunity
  • $11.50/hr to start
  • 1st & 2nd shifts available


Apply now! Www.LSI Staffing.Com

]]>
Tue, 24 Apr 2018 00:00:00 EDT 0
<![CDATA[Clerk]]> INTERPRETERS NEEDED

  • Bosnian Burmese Karen



  • will translate for doctor visits, court huse, meetings, etc,



  • mostly day hours, flexible



  • drug screen required



  • backgrund check required



  • proof of immunizations required



  • Apply now to help others by translating! Flexible schedule - day to day assignments.



$17.60 per hour - call for more details 402-261-6904
]]>
Tue, 24 Apr 2018 00:00:00 EDT 0
<![CDATA[Inventory Tech.]]> Stockroom Inventory Specialist


Pay Range: $12-14/hr


Description: Pick and issue parts per job order requirements, using RF scanner. Packs products received from production. Checks for accuracy of labeling, parts, and quantity. Maintains accurate inventory levels and assists in cycle counting of physical inventory.


Requires: High School diploma/GED, ability to read and follow written and verbal instructions.
Physical Requirements: Ability to stand, walk, stoop, kneel and crouch; ability to frequently lift and/or move objects 10-50 lbs, occasionally lift more than 70 lbs.


Testing: Measurement, assembly, math, and perception.

]]>
Tue, 03 Apr 2018 00:00:00 EDT 0
<![CDATA[Forklift]]> 3rd Party Logistics warehouse work in South Kansas City area, operate all three shifts, TONS OF OVERTIME, temp to hire work, $11/hourly plus shift differential, unloading and reloading inbound and outbound trucks. 

Position Specifics
  • Must be able to pay attention to details
  • Fast paced work
  • Lifting 50-70 pounds throughout shift
  • Exposure to elements

Requires clear background and drug screen prior to start.
]]>
Thu, 22 Mar 2018 00:00:00 EDT 0
<![CDATA[Production]]> Meat Packaging Openings in Sioux City

$12.00- $12.50 /hr to start

First and Second shifts available

Temp to Hire Opportunities, FT non-seasonal work with plenty of overtime, must pass drug screen and background check, apply now for consideration.

EOE

apply at:  www.Lsistaffing.Com
]]>
Thu, 01 Feb 2018 00:00:00 EST 0
<![CDATA[FTW/Industrial Maintenance Tech]]> Industrial Maintenance Mechanic

Direct Hire

$18.00-$20.00

SUMMARY:
Performs schedule/unscheduled maintenance on the physical plant, electrical, mechanical and electronic repairs and troubleshooting to determine problems in non-functioning CNC-control mechanical equipment used in the manufacturing process.

DUTIES AND RESPONSIBILITIES:
1. All facility maintenance mechanical, electrical, electronic, and the physical condition of building.
2. Conduct machine setup.
3. Performs routine preventive maintenance tasks to ensure that machines continue to run smoothly.
4. Performs scheduled maintenance on plant equipment and machinery.
5. Installing, repairing/replaces worn/defective parts, motors, control devices, electronics, etc., and troubleshooting all equipment.
6. Diagnose mechanical, electrical and electronic problems and determine how to correct them, repair manuals, and parts catalogs as necessary.
7. Inspect, operate, and test machinery and equipment in order to diagnose machine malfunctions.
8. Record maintenance and repair worked performed.
9. Dismantle devices to gain access to and remove defective parts, using hoists, cranes, hand tools and power tools.
10. Reads and interprets equipment manuals and work orders to perform required maintenance and service.
11. Comply with OSHA Safety and Health rules.
12. Perform other duties as assigned or needed.

MINIMUM JOB REQUIREMENTS:
? Must have 5 or more years experience in dealing with maintenance in a manufacturing environment.
? Experience in Electronics, Electrical repairs, Industrial Equipment installations, alignment, start-up repairs, etc.
? Must have recent and stable work history.
? Must have experience with operating basic hand tools.
? Must have mechanical and electrical knowledge. Some electronic knowledge is helpful.


CONDITIONS OF EMPLOYMENT:
  Successful candidate must submit to post offer, pre-employment physical examination/medical history check.
Possession of a valid Texas driver's license is a requirement for this job.
MUST be flexible with ALL shifts and Overtime if needed.

WORKING CONDITIONS AND PHYSICAL EFFORT:
? Work involves moderate to heavy exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises.
? Moderate to heavy physical activity. Requires handling of average-weight objects up to 50 pounds or standing and/or walking for more than six (6) hours per day.
? Able to climb portable ladders, crawl under and clim
]]>
Fri, 15 Dec 2017 00:00:00 EST 0
<![CDATA[ICT/Maintenance Tech]]> Maintenance Tech - 2nd /3rd shift Available
Direct Hire Wages DOE


Responsibilites:
Make sure all equipment is working safely, cleanly, and is efficient as possible
Make sure all production equipment is running with minimal down time.
Perform Prevenative Maintenance on all equipment.
Troubleshoot and repair equipment.
Keep track of parts usage and take necessary steps to keep usage minimal.
Communicate well with other technicians and machine operators.
Report any and all food safety and./or quality concerns to supervisor, QA or a member of management.
Physical Demands:
Able to stand, bend, twist, stoop, push, pull and lift from 10-80 lbs. Stand for long periods.
Also, work weekends and OT when required.
Work in adverse temperature conditions.
Need experience with pnuematics, electrical, hydaulics.
]]>
Thu, 19 Oct 2017 00:00:00 EDT 0
<![CDATA[Forklift]]> Looking for experienced Stand-up reach operators

Second and Third shift available

We will help get the cold gear and get you started asap!

36 degrees on the dock and 5 degrees in the freezer

Overtime Offered

Temp to Hire- weekly pay

Great Bennefits upon hire!

 
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Forklift]]> 20+ openings for first and second shift

No experience required- will certify and train

Must be able to work a ton of overtime and work weekends

Temp to hire- weekly pay

GREAT BENNIFITS UPON HIRE

Apply online

Walk-in 6601 Watauga Rd. Suite 114
]]>
Tue, 25 Jul 2017 00:00:00 EDT 0
<![CDATA[Business Development Associate]]> Essential Duties & Responsibilities: Existing customer base sales & service support ( approx. 90 - 100 stores ) Strong knowledge of inside & outside sales Complete site visits / customer well checks routinely Grow service areas included but not limited to: KC, Carthage, Jefferson, Sedalia, etc. Must be bi-lingual strong fluency ( written & oral ) in both Must have own transportation, valid DL Strong geographic knowledge of greater KC area  Experience working with bakeries or supermarkets preferred Some administrative functions - new order entries / catalog updates, etc.
]]>
Tue, 18 Apr 2017 00:00:00 EDT 0
<![CDATA[Drywall Installer]]> Local Company looking for an experienced Drywall Hanger

 

Responsibilities:

Hang sheetrock
Level 4 tape finish
Orange Peel texture
Follow all safety rules
Be 5 minutes early every day
Be a team player
Communicate clearly
Keep daily time sheet

Not Required skills and abilities


Working knowledge and experience with carpentry power tools
Knowledge of trim installation
Knowledge of wood framing
Knowledge of hardware installation


 
]]>
Mon, 07 Dec 2015 00:00:00 EST 0